Lunar 82.5%

User images created with StarTools.
Post Reply
Burly
Posts: 390
Joined: Mon Aug 31, 2015 7:06 am
Location: Northamptonshie uk

Lunar 82.5%

Post by Burly »

Approx 80 jpeg stacked in Siril processed in startools
Sw200pds Nikon D5300
F026934C-39BC-4FD1-95CD-47453A440D0E.jpeg
F026934C-39BC-4FD1-95CD-47453A440D0E.jpeg (217.98 KiB) Viewed 4776 times
User avatar
admin
Site Admin
Posts: 3382
Joined: Thu Dec 02, 2010 10:51 pm
Location: Melbourne
Contact:

Re: Lunar 82.5%

Post by admin »

Lovely moon shot!
Any reason why you shot and stacked JPEGs though?
Ivo Jager
StarTools creator and astronomy enthusiast
Burly
Posts: 390
Joined: Mon Aug 31, 2015 7:06 am
Location: Northamptonshie uk

Re: Lunar 82.5%

Post by Burly »

admin wrote:Lovely moon shot!
Any reason why you shot and stacked JPEGs though?
Purely ivo because I haven’t worked out how stack raw in Siril as when I use the script no flat dark or bias I get the Bayer matrix pattern and I haven’t had a minute to look into but I do have the raw as saved as Raw + L so if anyone can point me in the right direction I’m all ears, I need to get my head around manually setting Siril up .
User avatar
admin
Site Admin
Posts: 3382
Joined: Thu Dec 02, 2010 10:51 pm
Location: Melbourne
Contact:

Re: Lunar 82.5%

Post by admin »

Gotcha. Perhaps user Prusling has an idea? He wrote a tutorial on Sirli(ic); https://forum.startools.org/viewtopic.php?f=7&t=1577

Good thing you got the RAWs - once you got it sorted, you may have some luck with deconvolution to bring out more detail at a higher resolution (note: some special settings apply)

Clear skies!
Ivo Jager
StarTools creator and astronomy enthusiast
Burly
Posts: 390
Joined: Mon Aug 31, 2015 7:06 am
Location: Northamptonshie uk

Re: Lunar 82.5%

Post by Burly »

Thanks Ivo I very helpful will have a look at that and get my head around that.
alacant
Posts: 222
Joined: Mon Jan 25, 2016 7:03 am

Re: Lunar 82.5%

Post by alacant »

Hi @Burly, hi everyone

Tremendous moon shot. Love it.

It's quicker using Siril manually;)
When you've imported your raw frames, don't forget to check the 'Debayer'. But only for moon shots of course. For dso you would debayer the calibrated frames otherwise you're gonna end up filling your storage; the Debayered files are 3 times the size of the raw.
HTH
ss4.jpg
ss4.jpg (121.96 KiB) Viewed 4689 times
Burly
Posts: 390
Joined: Mon Aug 31, 2015 7:06 am
Location: Northamptonshie uk

Re: Lunar 82.5

Post by Burly »

Thanks Alcant i tried siliric thanks to Pruslings guide that's invaluable and that works good aswell and you can see everything a bit more in depth with the settings so i managed to create a file from Raw and have since retried the script no Flat bias dark etc and i worked no problem so a few options avaliable so here is the fits created from Siliric
https://www.dropbox.com/s/2abti4po53uv5 ... t.fit?dl=0


https://astrob.in/rbp4g4/0/
-----------------------------------------------------------
StarTools 1.6.389beta
Sun Apr 12 09:53:45 2020
-----------------------------------------------------------
File loaded [C:\Users\DAVID\Desktop\DSLR.fit].
Image size is 6016 x 4016
---
Type of Data: Linear and was Bayered, but not whitebalanced
--- Crop
Parameter [X1] set to [169 pixels]
Parameter [Y1] set to [215 pixels]
Parameter [X2] set to [5654 pixels (-362)]
Parameter [Y2] set to [3677 pixels (-339)]
Image size is 5485 x 3462
--- Bin
Parameter [Scale] set to [(scale/noise reduction 50.00%)/(400.00%)/(+2.00 bits)]
Image size is 2742 x 1731
--- Develop
Parameter [White Calibration] set to [Use Stars]
Parameter [Gamma] set to [1.00]
Parameter [Skyglow] set to [0 %]
Parameter [Digital Development] set to [7.67 %]
Parameter [Blue Luminance Contrib.] set to [100 %]
Parameter [Green Luminance Contrib.] set to [100 %]
Parameter [Red Luminance Contrib.] set to [100 %]
Parameter [Dark Anomaly Headroom] set to [5 %]
Parameter [Dark Anomaly Filter] set to [2.0 pixels]
--- Wipe
Parameter [Mode] set to [Correct Color & Brightness]
Parameter [Precision] set to [256 x 256 pixels]
Parameter [Dark Anomaly Filter] set to [4 pixels]
Parameter [Drop Off Point] set to [100 %]
Parameter [Corner Aggressiveness] set to [100 %]
Parameter [Aggressiveness] set to [75 %]
--- Develop
Parameter [White Calibration] set to [Use Stars]
Parameter [Gamma] set to [1.00]
Parameter [Skyglow] set to [0 %]
Parameter [Digital Development] set to [40.92 %]
Parameter [Blue Luminance Contrib.] set to [100 %]
Parameter [Green Luminance Contrib.] set to [100 %]
Parameter [Red Luminance Contrib.] set to [100 %]
Parameter [Dark Anomaly Headroom] set to [5 %]
Parameter [Dark Anomaly Filter] set to [5.0 pixels]
--- Contrast
Parameter [Expose Dark Areas] set to [No]
Parameter [Compensate Gamma] set to [No]
Parameter [Precision] set to [256 x 256 pixels]
Parameter [Dark Anomaly Filter] set to [4 pixels]
Parameter [Aggressiveness] set to [50 %]
Parameter [Dark Anomaly Headroom] set to [15 %]
--- HDR
Parameter [Small Detail Precision] set to [Max]
Parameter [Channels] set to [Brightness Only]
Parameter [Algorithm] set to [Reveal All]
Parameter [Dark/Bright Response] set to [1.00]
Parameter [Detail Size Range] set to [1000 pixels]
Parameter [Strength] set to [1.2]
Undo
Image size is 2742 x 1731
--- HDR
Parameter [Small Detail Precision] set to [Max]
Parameter [Channels] set to [Brightness Only]
Parameter [Algorithm] set to [Optimize Soft]
Parameter [Dark/Bright Response] set to [Full]
Parameter [Detail Size Range] set to [1000 pixels]
Parameter [Strength] set to [1.2]
--- Wavelet Sharpen
Parameter [Structure Size] set to [Large]
--- SNR-aware Wavelet Sharpening
Parameter [Scale 1] set to [100 %]
Parameter [Scale 2] set to [100 %]
Parameter [Scale 3] set to [100 %]
Parameter [Scale 4] set to [100 %]
Parameter [Scale 5] set to [100 %]
Parameter [Mask Fuzz] set to [4 pixels]
Parameter [Amount] set to [100 %]
Parameter [High SNR Size Bias] set to [29 %]
Parameter [Low SNR Size Bias] set to [85 %]
Parameter [Dark/Light Enhance] set to [49% / 51%]
Mask used (BASE64 PNG encoded)



--- Deconvolution
Parameter [Image Type] set to [Lunar/Planetary]
Parameter [Secondary PSF] set to [Off (Primary Only)]
Parameter [Primary PSF] set to [Moffat Beta=4.765 (Trujillo)]
Parameter [Tracking Propagation] set to [During Regularization (Quality)]
Parameter [Primary Radius] set to [1.5 pixels]
Parameter [Iterations] set to [6]
Parameter [Regularization] set to [1.00 (optimal noise and detail)]
Parameter [Mask Fuzz] set to [4.0 pixels]
Parameter [Enhanced Deringing] set to [Off]
Parameter [Bright Response] set to [Full]
---
Parameter [UNKNOWN] set to [Small]
Mask used (BASE64 PNG encoded)



--- Fractal Flux
Parameter [Brightness Mask Mode] set to [Off]
Parameter [Algorithm] set to [Modulate Unsharp Mask]
Parameter [Negative Flux] set to [0 %]
Parameter [Positive Flux] set to [500 %]
Parameter [Detail Filter] set to [1.0 pixels]
Parameter [Filter Fuzz] set to [1.0 pixels]
Parameter [Filter Radius] set to [1.5 pixels]
Parameter [Filter Amount] set to [200 %]
Parameter [Mask Fuzz] set to [1.0 pixels]
Parameter [Brightness Mask Power] set to [1.00]
--- Develop
Parameter [White Calibration] set to [Use Stars]
Parameter [Gamma] set to [1.00]
Parameter [Skyglow] set to [0 %]
Parameter [Digital Development] set to [10.00 %]
Parameter [Blue Luminance Contrib.] set to [100 %]
Parameter [Green Luminance Contrib.] set to [100 %]
Parameter [Red Luminance Contrib.] set to [100 %]
Parameter [Dark Anomaly Headroom] set to [5 %]
Parameter [Dark Anomaly Filter] set to [5.0 pixels]
--- Psycho-Visual Grain Equalization De-Noise
Parameter [Grain Size] set to [5.0 pixels]
--- Psycho-Visual Grain Equalization De-Noise
Parameter [Mode] set to [Psychovisual]
Parameter [Grain Removal] set to [58 %]
Parameter [PV Detail Size] set to [2.0 pixels]
Parameter [Grain Limit Detail] set to [5.0 pixels]
Parameter [PV Support Gamma] set to [2.20]
Parameter [Grain Limit Color] set to [5.0 pixels]
Parameter [PV Support Area] set to [3 pixels]
File saved [C:\Users\DAVID\Pictures\Lunar\DSLR 82.5.jpg].
Post Reply