Page 1 of 1

Eta Carina repro

Posted: Sat Jul 18, 2015 4:04 am
by Rowland
This was taken in April 2012 and has been preprocessed using the script I'm experimenting with. Pixinsight - debayer, registration and integration, and ST post processing. This is one of the early cooled DSLR images. No noise reduction. The pleasing thing about this repro is the amount of data retained compared to earlier processing attempts, which I think is due to the script method of data reduction and ST of course.

Given the weather, imaging has been impossible for months in my neck of the woods.

24 x 210 second frames - Canon 1000D iso400 f5.6 200mm telephoto. Bias, darks, flats.

Code: Select all

-----------------------------------------------------------
StarTools 1.4.303
Sat Jul 18 13:09:13 2015
-----------------------------------------------------------
File loaded [/home/geoland/Astrophotography/Eta_Carina_400/eta_carina_400.tiff].
--- 
--- Develop
Parameter [White Calibration] set to [Use Stars]
Parameter [Gamma] set to [1.00]
Parameter [Skyglow] set to [0 %]
Parameter [Digital Development] set to [83.53 %]
Parameter [Blue Luminance Contrib.] set to [100 %]
Parameter [Green Luminance Contrib.] set to [100 %]
Parameter [Red Luminance Contrib.] set to [100 %]
Parameter [Dark Anomaly Headroom] set to [5 %]
Parameter [Dark Anomaly Filter] set to [17.0 pixels]
--- Wipe
Parameter [Mode] set to [Correct Color & Brightness]
Parameter [UNKNOWN] set to [Yes]
Parameter [Precision] set to [256 x 256 pixels]
Parameter [Dark Anomaly Filter] set to [2 pixels]
Parameter [Drop Off Point] set to [0 %]
Parameter [Corner Aggressiveness] set to [100 %]
Parameter [Aggressiveness] set to [85 %]
--- Develop
Parameter [White Calibration] set to [Use Stars]
Parameter [Gamma] set to [1.00]
Parameter [Skyglow] set to [0 %]
Parameter [Digital Development] set to [Off]
Parameter [Blue Luminance Contrib.] set to [100 %]
Parameter [Green Luminance Contrib.] set to [100 %]
Parameter [Red Luminance Contrib.] set to [100 %]
Parameter [Dark Anomaly Headroom] set to [5 %]
Parameter [Dark Anomaly Filter] set to [Off]
--- Deconvolution
Parameter [Image Type] set to [Deep Space]
Parameter [Mask Behavior] set to [De-ring Mask Gaps, Hide Result]
Parameter [Radius] set to [1.5 pixels]
Parameter [Iterations] set to [6]
Parameter [Regularization] set to [1.00 (optimal noise and detail)]
Parameter [Mask Fuzz] set to [8.0 pixels]
--- Develop
Parameter [White Calibration] set to [Use Stars]
Parameter [Gamma] set to [1.00]
Parameter [Skyglow] set to [0 %]
Parameter [Digital Development] set to [80.00 %]
Parameter [Blue Luminance Contrib.] set to [100 %]
Parameter [Green Luminance Contrib.] set to [100 %]
Parameter [Red Luminance Contrib.] set to [100 %]
Parameter [Dark Anomaly Headroom] set to [5 %]
Parameter [Dark Anomaly Filter] set to [Off]
--- HDR
Parameter [Small Detail Precision] set to [Max]
Parameter [Channels] set to [Brightness Only]
Parameter [Algorithm] set to [Tame Highlights]
Parameter [Dark/Bright Response] set to [Full]
Parameter [Detail Size Range] set to [64 pixels]
Parameter [Strength] set to [1.0]
--- Color
Parameter [Cap Green] set to [To Yellow]
Parameter [Bias Slider Mode] set to [Sliders Reduce Color Bias]
Parameter [Style] set to [Artistic, Detail Aware]
Parameter [LRGB Method Emulation] set to [RGB Ratio, CIELab Luminance Retention]
Parameter [Dark Saturation] set to [7.00]
Parameter [Bright Saturation] set to [Full]
Parameter [Saturation Amount] set to [300 %]
Parameter [Blue Bias Reduce] set to [1.24]
Parameter [Green Bias Reduce] set to [1.05]
Parameter [Red Bias Reduce] set to [1.19]
Parameter [Mask Fuzz] set to [1.0 pixels]
--- Wavelet Sharpen
Parameter [Intelligent Enhance] set to [Yes]
Parameter [Scale 1] set to [100 %]
Parameter [Scale 2] set to [100 %]
Parameter [Scale 3] set to [100 %]
Parameter [Scale 4] set to [100 %]
Parameter [Scale 5] set to [100 %]
Parameter [Mask Fuzz] set to [8.0 pixels]
Parameter [Amount] set to [60 %]
Parameter [Small Detail Bias] set to [75 %]
--- Wavelet De-Noise
Parameter [Scale 1] set to [90 %]
Parameter [Scale 2] set to [90 %]
Parameter [Scale 3] set to [90 %]
Parameter [Scale 4] set to [90 %]
Parameter [Scale 5] set to [0 %]
Parameter [Mask Fuzz] set to [1.0 pixels]
Parameter [Scale Correlation] set to [6]
Parameter [Color Detail Loss] set to [12 %]
Parameter [Brightness Detail Loss] set to [12 %]
Parameter [Grain Size] set to [4.5 pixels]
Parameter [Read Noise Compensation] set to [Off]
Parameter [Smoothness] set to [75 %]
Undo.
--- Develop
Parameter [White Calibration] set to [Use Stars]
Parameter [Gamma] set to [1.00]
Parameter [Skyglow] set to [0 %]
Parameter [Digital Development] set to [0.01 %]
Parameter [Blue Luminance Contrib.] set to [100 %]
Parameter [Green Luminance Contrib.] set to [100 %]
Parameter [Red Luminance Contrib.] set to [100 %]
Parameter [Dark Anomaly Headroom] set to [5 %]
Parameter [Dark Anomaly Filter] set to [Off]
File saved [/home/geoland/Astrophotography/Eta_Carina_400/eta_carina_400ST.tiff].

Re: Eta Carina repro

Posted: Mon Jul 20, 2015 2:53 am
by 1074j
Awesome!

Re: Eta Carina repro

Posted: Wed Jul 22, 2015 2:16 am
by admin
That's a lot of hidden nebulosity alright! (possibly use the Isolate preset / no mask to push back the star field?)
Any chance you could post a link to the past renditions? I'm curious! :thumbsup:

Re: Eta Carina repro

Posted: Thu Jul 23, 2015 11:44 am
by Rowland
http://www.astrobin.com/full/23830/0/

This is the original. The blue reflection nebula is more evident in the latest version and the image is generally brighter? I put it down to calibration. There is only so much data to be squeezed out of a poorly calibrated stack. :confusion-shrug:

Re: Eta Carina repro

Posted: Thu Jul 23, 2015 9:08 pm
by Rowland
1074j wrote:Awesome!
Thanks!

Re: Eta Carina repro

Posted: Fri Jul 24, 2015 11:59 pm
by admin
Rowland wrote:I put it down to calibration. There is only so much data to be squeezed out of a poorly calibrated stack. :confusion-shrug:
Absolutely.