can't remove noise

Questions and answers about processing in StarTools and how to accomplish certain tasks.
Post Reply
alacant
Posts: 222
Joined: Mon Jan 25, 2016 7:03 am

can't remove noise

Post by alacant »

Hi

My first go at st so please be patient:)

I'm having great difficulty getting noise removed from my dss fits file. I've followed many YouTube tutorials and I'm beginning to wonder whether the stack is at fault:
<edit>
https://drive.google.com/file/d/0B_uUt0 ... sp=sharing
</edit>
autodev really messes up the image and I can't retrieve it. Using dev is a little better but although I can see some detail, the noise reduction is poor.

Maybe it is the iso speed in camera:
nikon d40 at iso 800 then 12 or so light frames at 10-20 seconds with dark, bias and flat frames which *seem* to have worked but...

Any help especially if someone could check the fits file and comments on iso in camera before I spend any more time would be most gratefully recieved.
TIA
Last edited by alacant on Thu Jan 28, 2016 7:07 am, edited 1 time in total.
Burly
Posts: 390
Joined: Mon Aug 31, 2015 7:06 am
Location: Northamptonshie uk

Re: can't remove noise

Post by Burly »

Try auto dev-keep-crop-keep-wipe-keep- now dev manually stretch too suit -keep -work through modules turn off tracking at end of processing then denoise , hope this helps .
alacant
Posts: 222
Joined: Mon Jan 25, 2016 7:03 am

Re: can't remove noise

Post by alacant »

Hi
Thanks for that sequence. It's a lot better. I used the hds reveal, but that's the only module I used, I'm having problems with the colour cast. It seems to be red and also the stars have bloated. Do we have modules for colour and 'fat stars'? In the nef files the stars are quite sharp points.
Do forgive the newbie questions and thanks again, I feel I'm getting somewhere.
m42all.jpg
m42all.jpg (200.2 KiB) Viewed 11084 times
Burly
Posts: 390
Joined: Mon Aug 31, 2015 7:06 am
Location: Northamptonshie uk

Re: can't remove noise

Post by Burly »

Dropbox your fits file so peeps can take a look at data .
alacant
Posts: 222
Joined: Mon Jan 25, 2016 7:03 am

Re: can't remove noise

Post by alacant »

Hi
There's a public link to the fits in the first post. Is that OK instead?
Thanks for your interest.

(I can Dropbox it too later if necessary)
Burly
Posts: 390
Joined: Mon Aug 31, 2015 7:06 am
Location: Northamptonshie uk

Re: can't remove noise

Post by Burly »

You may want to amend that link :D think you picked the wrong file comes up with some sort of exam pdf
alacant
Posts: 222
Joined: Mon Jan 25, 2016 7:03 am

Re: can't remove noise

Post by alacant »

Burly
Posts: 390
Joined: Mon Aug 31, 2015 7:06 am
Location: Northamptonshie uk

Re: can't remove noise

Post by Burly »

Thats m45 though i think your settings in DSS need tweaking ,did you set matrix pattern for your camera in fits settings ,im no expert but your stars are bloated may be the cause
alacant
Posts: 222
Joined: Mon Jan 25, 2016 7:03 am

Re: can't remove noise

Post by alacant »

Hi
Sorry. I posted the wrong fits. This is M42:
https://drive.google.com/file/d/0B_uUt0 ... sp=sharing

I didn't have my camera, a nikon d40 listed in dss so I put nikon d50 which I think has the same sensor. Also, it was full moon and I used iso 800. Would this make a big difference?

Thanks for having a look.
Burly
Posts: 390
Joined: Mon Aug 31, 2015 7:06 am
Location: Northamptonshie uk

Re: can't remove noise

Post by Burly »

im not sure maybe ivo will have a better idea to whats causing bloating of stars .
Post Reply